EINHELL HYPRESSO 18 Mode D'emploi page 12

Separately available accessories
18V 1.5Ah PXC Lithium-Ion battery
18V 2.0Ah PXC Lithium-Ion battery
18V 2.5Ah PXC Lithium-Ion battery
18V 3.0Ah PXC Lithium-Ion battery
18V 4.0Ah PXC Lithium-Ion battery
18V 3.0Ah PXC Plus Lithium-Ion battery
18V 4.0Ah PXC Plus Lithium-Ion battery
18V 5.2Ah PXC Plus Lithium-Ion battery
18V 4.0Ah/6.0Ah PXC Plus Lithium-Ion battery
18V 5.0Ah/8.0Ah PXC Plus Lithium-Ion battery
18V PXC Dual Port Fast Charger
18V PXC Fast Charger
Contact your local retailer for more specifi c
models of batteries and charger available in your
area. You can also explore battery + charger
options at Einhell.com.
3. Intended use
This tool is designed to clean vehicles, machines,
buildings, facades, etc. in the private sector.
The equipment is allowed to be used only for its
prescribed purpose. Any other use is deemed to
be a case of misuse. The user/operator and not
the manufacturer will be liable for any damage or
injuries of any kind resulting from such misuse.
Please note that our equipment has not been
designed for use in commercial, trade or
industrial applications. Our warranty will be voided
if the equipment is used in commercial, trade or
industrial businesses or for equivalent purposes.
This machine is not allowed to be used by
persons (including children) with reduced
physical, sensory, or mental capacities or those
with a lack of experience and knowledge.
4. Technical data
Motor power supply: ............................ 18V
Maximum pressure: .................................348 PSI
Maximum fl ow per minute: .................... 1.0 GPM
Max. water inlet pressure: ......................72.5 PSI
Water inlet temperature: ..................41°F – 104°F
Weight (Tool only): .....................................4.6 lbs
Anl_Hypresso_18_24_Li_SPK7_USA.indb 12 Anl_Hypresso_18_24_Li_SPK7_USA.indb 12
EN
Wear ear-muff s.
The impact of noise can cause damage to
hearing.
Reduce noise generation and vibration to a
minimum!
•
Use only equipment that is in perfect
condition.
•
Maintain and clean the equipment regularly.
•
Adapt your way of working to the equipment.
•
Do not overload the equipment.
•
Have the equipment checked if necessary.
•
Switch off the equipment when not in use.
CAUTION!
Residual risks
Even if you use this electric power tool in
accordance with the instructions, certain
residual risks cannot be eliminated. The
following hazards may arise in connection
with the equipment's construction and layout:
1. Lung damage if no suitable protective dust
mask is used.
2. Damage to hearing if no suitable ear
protection is applied.
3. Health damage caused by hand-arm
vibrations if the equipment is used over a
longer period or is not properly guided and
maintained.
Limit the operating time.
All stages of the operating cycle must be
considered (for example, times in which the
electric tools are switched off and times in which
the tool is switched on but operates without load).
5. Before starting the equipment
Caution!
Protect your battery pack against moisture,
rain and high humidity. Make sure that no water
runs over the battery pack or its contacts during
operation.
Use the PXC battery protector (17) supplied with
the tool. First insert the battery in your PXC tool
(Fig. 3/ Item 19). As you do so, make sure that
the contacts on the tool and on the battery are
dry. Now pull the PXC battery protector (17) over
the battery (Fig. 4). Make sure that PXC battery
protector is not damaged, is correctly seated
and seals off every contact surface from the tool.
- 12 -
15.11.2023 09:46:55 15.11.2023 09:46:55