Carrera CRR RACE-210 Mode D'emploi page 48

3. Press the unlocking button for the shaving head frame;
the shaving head frame opens.
4. remove the lateral decorative strips.
5. Use a flat object (e.g. a knife or slotted screwdriver) to
lever the cover off the upper housing part.
6. Loosen the 4 cross head screws that are now visible.
7. Lever both housing halves apart.
8. Use diagonal cutting pliers to disconnect the batteries
from the circuit board. Dispose of all parts in compliance
with the regulations. (→ 11. Disposal).
the nickel-metal hydride battery used for this device
may not be treated as household waste. the battery
must be disposed of properly. Contact battery
NiMH distributors or local waste disposal points for this.
NOTE: the following will void the warranty: Incorrect or
improper handling of the device, failure to comply with the
safety precautions that apply to the device, use of force,
alterations or repairs carried out by a party other than the
service address that we have authorised.
furthermore, components that are subject to normal wear
and tear or use are excluded from the warranty.
48