Carrera CRR RACE-210 Mode D'emploi page 42

Cleaning with water:
You can comfortably clean the shaving head of your
shaver by rinsing it under running water (see fig.).
1. Press the unlocking button (6); the
shaving head frame opens.
2. Hold the appliance so that the cutting
blades point down at an angle. the
risk of water entering the inside of the
appliance will thus be reduced.
the water temperature should not
exceed 70 °C.
3. If you prefer rinsing the appliance un-
der running water, you may also add
a few drops of usual liquid soap. to
achieve more intense cleaning results,
switch the appliance on.
CAuTION!
the housing may be cleaned with a damp cloth;
however, the shaver must not be immersed in water!
4. Allow the shaver to dry before closing the shaving head
frame and reattaching the protective cap.
5. the shaving head frame must be touched on the sides
only and pressed down until the fixing clips lock in place.
42