Télécharger Imprimer la page

Rowenta IXEO QR1010 Mode D'emploi page 3

Publicité

• The iron must not be left unattended while it is connected to the supply mains.
• Cleaning and user maintenance shall not be made by children without
supervision.
• The iron is not to be used if it has been dropped, if there are visible signs of
damage or if it is leaking.
• Always disconect the iron from the electrical outlet, before you leave the room.
• To reduce the risk of contact with hot water emitting from steam vents, check
appliance before each use by holding it away from body and operating steam
button.
SAVE THESE INSTRUCTIONS
WHAT WATER MAY BE USED ?
Your iron has been designed to operate using untreated tap water. If in doubt,
check with your local water authority. However, if your water is very hard, you can
mix 50% untreated tap water with 50% distilled or demineralised water.
IMPORTANT Heat concentrates the elements contained in water during
evaporation.The types of water listed below contain organic waste or mineral
elements that can cause spitting, brown staining or premature wear of the
appliance: water from tumble dryers, scented or softened water, water from
refrigerators, batteries or air conditioners, pure distilled or demineralised water
or rain water should not be used in your iron. Also do not use boiling, or bottled
mineral water.
ENVIRONMENT
Environment protection first !
Your appliance contains valuable materials which can be recovered or
recycled.
Leave it at a local civic waste collection point.
3

Publicité

loading

Ce manuel est également adapté pour:

Ixeo qr10 serieIxeo qr1010u1