Conrad 75 26 88 Notice D'emploi page 58

'Quad Display'
Using the 'left' and/or 'right' keys t
u (D, J) on the remote control, select
whether a simultaneous display of all
four receive channels is to be activated
(ON) or deactivated (OFF) and then
press the 'OK' (E) key to confirm.
'Scan Period'
You can use this menu to set the interval at which the individual receive channels are displayed.
Using the 'left' and/or 'right' keys t u
(D, J) on the remote control, select the
intervals (OFF, 5 sec, 10 sec, 15 sec)
at which a sequential switchover of the
receive channels is to occur and then
press the 'OK' (E) key to confirm.
If the 'OFF' option is selected, sequen-
tial switchover is deactivated.
Sequential switchover is automatically
deactivated as soon as a receive chan-
nel is manually selected.
58