Conrad 75 26 88 Notice D'emploi page 47

The connection cables must not be kinked or squashed. This can result in
malfunctions, short circuits and defects in the device.
Make sure that cables or wires are not damaged when drilling or bolting in
place.
The radio camera is suited for outdoor use. All other components or plug sock-
ets of the product are only suitable for operation in dry rooms.
Do not point the radio camera directly toward bright sunlight or toward strong
or direct light sources as this may lead to over-exposure.
• Find a suitable place for mounting from which the area to be monitored can be observed.
• There are installation holes on the support. Draw these (e.g. with a pencil) on the wall.
• Drill the holes into the wall.
• Attach the mounting bracket to the
wall using suitable mounting mate-
rial.
• Fasten the radio camera to the sup-
port.
47