Conrad 75 26 88 Notice D'emploi page 54

'Pairing'
Use this menu to connect the radio camera to the radio receiver.
Using the 'left' and/or 'right' keys t
u (D, J) on the remote control, select
a receive channel and then press the
'OK' (E) key on the remote control.
You now have approx. 60 seconds to
press the 'PAIR' (9) key on the radio
camera's connection cable.
As soon as a connection is success-
fully made between radio camera and
radio receiver, the image from the ra-
dio camera is displayed on the screen.
'Resolution'
You can use this menu to set the resolution for saving the image data.
Using the 'left' and/or 'right' keys t
u (D, J) on the remote control, select
the desired resolution (640x480 pixels
or 320x240 pixels) and then press the
'OK' (E) key to confirm.
Note that at a high resolution, a much
larger recording file size is achieved
than at a low resolution.
54