Perel LEDA4001 Serie Mode D'emploi page 8

 If the protective glass [3] is damaged, disconnect the lamp immediately
from the mains. Have it repaired immediately by a qualified technician.
Do not use the lamp with a cracked or broken protective glass.
 This luminaire does not have a built-in device to disconnect it from the
electric mains. Make sure to electrically isolate the luminaire before
installation or maintenance activities are performed.
 Wipe the device regularly with a moist, lint-free cloth. Do not use alcohol
or solvents.
 There are no user-serviceable parts.
 Contact your dealer for spare parts if necessary.
8. Technical Specifications
All models
electrical data
power LED module
total nominal power
nominal voltage driver
nominal voltage LED module
power factor
energy consumption
cable
light technical data
beam angle
luminous flux
colour rendering index
starting time
warm-up time (60 %)
lifespan
nominal life time
number of switching cycles
dimensions & weight
dimensions (W x H x D)
cable length
weight
V. 01 – 25/11/2015
LEDA4001 Series
10 x SMD 2835 LED
12 W
110-240 V~, 50/60 Hz
62 V
0.9
12 kWh/1000 h
H05RN-F 3G1.0 – 50 cm
100°
600 lm ± 50 lm
> 70
< 0.5 s
< 1 s
36 000 h
18 000
spot
incl. bracket
± 50 cm
420 g
8
130 x 95 x 25 mm
148 x 95 x 85 mm
©Velleman nv