Programme
Selector
Control Panel and Indicator Lights
Knob:
You can turn it in both directions to choose the required programme.
Time selection
: To modify the drying timing of required programme; it works only with certain
programmes.
Delay start
:To delay the start of the drying cycle and to dry your laundry when electricity costs
less (please see dedicated section).
Delicate fabrics (symbol): When pulled, this indicator
with this special function, the drying temperature is lower to better protect your delicate clothes.
Anti-crease
: Select the anti-crease function at the end of drying cycle. The drum keeps
moving at regular phases to refresh the laundry.
Cool down
: This indicator turns on during the final cool phase of the cycle.
Start/Pause
: To start the programme required or to pause the cycle.
Automatic programmes: Depending on desired programme, specific indicators turn on (please
see "programme list"); ECO indicator
Filter care
: When on, please clean the filters.
Full water tank
: When on, please empty the water tank.
SELECTING THE PROGRAMME
EN
8
CONTROLS AND INDICATORS
Empty Water
Filter Care
Indicator
Indicator
Time Selection
Delay Start
Button
Button
turns on when you select a low consumption programme.
This machine has a special Sensor Dry to help you choose your
preferred programme simply by selecting the level of dryness
wanted.
For small loads and pre-dried clothes, please use a Timing
programme and select "Delicate fabrics" button to lower the
temperature inside the drum.
If the Sensor does not detect any item, this Dryer will work for only
10 minutes before starting the Cool down phase.
If the load is too big or too wet, this Dryer will automatically work for
3 hours and then start the Cool down phase.
At the end of each programme, there is always the Cool Down
phase: it is a cool-air refresh phase of around 15 minutes.
Program
Display
Acrylic Synthetic
Anti-Crease
Button
Button
turns off and this new one
Start/Pause
Button
turns on;