FEATURES
• 181 Channel Tuner - The tuning system is capable of receiving all 68 VHF/UHF standard broadcast channels that
are available in your area. When operating on a cable system, it can tune to the standard VHF channel frequencies
plus up to 113 cable channel frequencies. The actual number of channels received depends upon channel
reception in your area or your cable system.
• On-Screen 3 Language Display - This TV can display the on screen language in English, Spanish or French.
• Sleep Timer - Operable from the remote control, this TV can be programmed up to 120 minutes to turn off automatically.
• Memory Back Up - This system prevents loss of memorized channel selections in case a power interruption to the
TV should occur.
• Picture Control Adjustments - The On-Screen display allows precise remote control adjustment of BRIGHTNESS,
COLOUR, CONTRAST, SHARPNESS and TINT.
• Closed Captioned Decoder - Displays text captions or 1/2 of full screen text on the screen for hearing impaired viewers.
• Stereo/SAP Reception - This TV is designed to receive stereo and Second Audio Program (SAP) broadcasts
where available.
LOCATION OF CONTROLS
FRONT
POWER
M CHANNEL L
ENTER
RESET
1
2
3
1. POWER Button - Press to turn the TV on or off.
2. Remote Sensor - Signals from the Remote Control
unit are received here.
3. CHANNEL M / L Buttons - Press to select a higher
or lower numbered channel set into memory.
(ENTER Button) - Press to enter or select informa-
tion for On-Screen operations.
(RESET Button) - Press, while in the On-Screen
menu mode, to reset the On-Screen picture adjust
ments to their factory preset positions.
4. VOLUME M / L Buttons - Press to raise or lower
the level of the sound.
(MENU Buttons) - Press both buttons to display the
On-Screen menu functions.
(SET + / – Buttons) - Press to select the desired
setting during On-Screen operations.
4
M VOLUME L
– SET / MENU +
VIDEO IN
(MONO) L – AUDIO IN – R
4
5
BACK
PHONES
6
5. FRONT AUDIO (L / R) / VIDEO IN Jacks (AUX2) -
Audio and video signal cables from an external
source can be connected here.
6. PHONES (Earphone) jack - Plug an earphone or
monaural headphones with a 3.5mm miniplug into
this jack for private listening.
7. VHF/UHF IN (ANT) Jack - Connect a VHF/UHF
antenna or CATV cable to this jack.
8. REAR AUDIO (L / R) / VIDEO OUT Jacks - Used to
output audio and video signals to a TV, amplifier or VCR.
9. REAR AUDIO (L / R) / VIDEO IN Jacks (AUX1) -
Audio and video signal cables from an external
source can be connected here.
10. S-VIDEO IN Jack - S-Video signal cable from an ex
ternal source can be connected here.
11. AC Power Cord - Plug into an outlet having 120V,
60 Hz AC power only.
OUT
IN
VIDEO
ANT.
L
(MONO)
S-VIDEO
AUDIO
R
7
8 9
10
11