Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
AO (Alarm Out)
The camera can activate external devices such as buzzers or lights. Connect the device to
the AO (Alarm Out) and G (Ground) connectors.
Connecting the Power
Connect power of 12VDC for the network camera.
Connect the positive (+) pole to the '+' position and the negative (-) pole to the '-' position
for the DC power.
CAUTION:
Connecting Test Monitor Out(CVBS)
Connect 2pin connecter test video cable(Optional) to check test video.
• Be careful not to reverse the polarity when you connect
the power cable.
• A router featuring PoE (Power over Ethernet) can also be
used to supply power to the camera.
• For the power specifications, refer to the appendix, prod-
uct specification in User's Manual.
• If PoE and 12 VDC are both applied, the camera will be
supplied with the power from PoE.
EN
9
Publicité
