Installation
Pre-cut skirting board (DW6*R70**U* Series)
545.4
36
English
DW7500RM_DD81-02968A-06_EN.indd 36
1. Insert the provided brackets to the
bottom of the dishwasher. Turn them
into position.
• See the figure on the left for the correct
attaching sequence and place of the
brackets.
2. Insert the pre-cut skirting board into
the brackets first, and then tighten the
screws to fix the board. See the figure
on the left and make sure the brackets
are positioned in the correct place.
CAUTION
Make sure the skirting board does not
interfere with the dishwasher's door
opening and closing.
3. Push the skirting board with the
brackets into the bottom of the
dishwasher as shown.
2022-09-29
4:05:46