8. Technical specifications
Guarantee Card (see Backcover)
Model:
NEB 210
Type:
BR-CN188
Aerosol performances according to EN13544-1:2009 based
on adult ventilatory pattern with sodium fluoride (NaF):
Nebulisation rate:
0.4 ml/min. (NaCI 0.9%)
Aerosol output:
1.1 ml
Aerosol output rate: 0.13 ml/min.
Residual Volume:
≤ 0.5 ml
Particle size (MMAD): ≤ 2.08 µm
GSD (geometric
1.87 µm
standard deviation):
RF (respirable frac-
95.8 %
tion %, 0.5 - 5 µm):
Large particle range
4.2 %
(> 5 µm):
Maximum air
2.41 bar
pressure:
Operating air flow:
5~8 l/min.
Acoustic noise level: 51.5 dBA
Power source:
230 V 50 Hz AC
Current:
≤ 700 mA
Power lead length:
1.5 m
Nebuliser capacity:
min. 2 ml; max. 6 ml
Operating limits:
30 min. On / 30 min. Off
Operating
10 - 40 °C / 50 - 104 °F
conditions:
10 - 95 % relative maximum humidity
700 - 1060 hPa Atmospheric pressure
Storage and shipping
-20 - +60 °C / -4 - +140 °F
conditions:
10 - 95 % relative maximum humidity
700 - 1060 hPa Atmospheric pressure
Weight:
approx. 1200 g
Dimensions:
160 x 161 x 90 mm
IP Class:
IP21
Reference to
EN 13544-1; EN 60601-1; EN 60601-2;
standards:
EN 60601-1-6; IEC 60601-1-11
Microlife NEB 210
Expected service life: 1000 hours
Class II device as regards protection against electric shocks.
Nebuliser, mouthpiece and masks are type BF applied parts.
The technical specifications may change without prior
notice.
Please report any serious incident that has occurred in relation to
the device, injury or adverse event to the local competent authority
and to the manufacturer or to the european authorised represen-
tative (EC REP).
5
EN