Fault Rectification - Maico LW 9 Instructions De Montage Et Mode D'emploi

uk │ 8. Fault rectification

8. Fault rectification

● Call on the services of a trained electrician
any time there is a fault.
● Repairs should only be carried out by a
trained electrician.
Danger to life from electric
shock.
Prior to accessing the
DANGER
connection terminals, switch off
all supply circuits. Switch off the
mains fuse, secure against
being accidentally switched
back on and position a visible
warning sign.
Fault Cause, measure
The mains fuse is off.
Green LED
Switch the mains fuse on.
[3] off
Measuring probe faulty
Green LED
or
[3] flashing
Sensor cable (terminals
6 and 7) interrupted. Call on
the services of a trained
electrician.
If the fault still continues or occurs
again, switch off the mains fuse by
disconnecting the fan from the power
supply at all poles.
Let a certified electrician determine
the cause of the fault and eliminate it.
12
9. Dismantling
Dismantling may only be undertaken
by a trained electrician ( Chapter 2).
Danger to life from electric
shock.
Prior to accessing the connection
DANGER
terminals, switch off all supply
circuits. Switch off the mains
fuse, secure against being
accidentally switched back on
and position a visible warning
sign.
1. Switch off mains fuse, secure and fit
warning sign.
2. Remove all cables.
3. Disassemble the components.
10. Disposal
Do not dispose of in domestic
waste. The unit contains in part
materials that can be recycled and in
part substances that should not end
up in the domestic waste.
Dispose of the unit once it has reached the
end of its service life according to the
regulations valid where you are.