Nexgrill 720-0958AE Instructions D'opération page 10

Match Light
1. If the burner will not light after several
attempts then the burner can be match lit,
before using the match allow 5 minutes for
any accumulated gas to dissipate.
2. Clip a match on one end of the lighting rod.
3. Light match.
4. Hold lighting rod and insert lighted match
right next to the burner ports or ceramic file.
5. Push and turn the designated control knob
to .
6. Burner should ignite immediately.
Note: Remove all packaging, including straps, before using the grill
Main Burner
Main Burner
2
Push In
3
Control Knob, Label
10
Component Identification
Sear Burner
Sear Burner