Télécharger Imprimer la page

EXIT Toys 10FTX6.6FT Mode D'emploi page 66

Publicité

Les langues disponibles

Les langues disponibles

Step 8. Fill the pool
WARNING: If more than 1~2
inches of water collects on any
one side before you
90%
is not level enough, and must be
corrected! You
shall pull out the drain plug,
release the water completely,
disassemble the pool
completely,locate the pool on
a plane surface, repeat set up
instructiion.
WARNING: DO NOT OVERFILL as this could cause the pool to collapse.In times of
heavy rainfall you may need to empty some of the water to ensure the level is
correct.
bottom of the pool. Pull the outer wall out from the top edge, all
6.0 Disassembly and storage
WARNING: Do not let your children stand at downfold and face the water outlet
during the drainage. The water current may sweep your children.
WARNING: Pool should be stored at places where it is cool and dry, with no sharp
object surrounded, or no heavy objects lying above, which may cause damage to the
pool.
Step 1. I
pump has been disconnected.
Step 2.
pool.
Step 3. Attach your garden hose to the drainage valve connector, and placing the
other end of the hose in an area where the water can drain safely,such as a storm
end of the hose must be lower in elevation than the pool to ensure complete
drainage.
Step 4.
12
MSP-30105-V03

Publicité

loading

Ce manuel est également adapté pour:

10ftx7x5ft