Anest Iwata SPRINT JET IS800 Manuel D'instructions D'utilisation page 8

IS850 SMART JET - COMPRESSOR TURNS ON AND OFF WHILE AIRBRUSH IS NOT SPRAYING AIR.
The compressor has an air leak. When this happens:
1. Spray all connections with a soapy water solution. Resulting bubbles indicate an air leak.
2. Tighten connections.
3. If bubbling doesn't stop, try wrapping threads with thread sealant tape (max 3 wraps only) or applying beeswax to the threads.
Both methods provide an airtight seal.
4. If the air leak is in the middle of an air hose the hose will need to be replaced.
COMPRESSOR SUDDENLY TURNS OFF
The thermal overload switch will turn off your compressor before it overheats. Allow unit to cool down. The switch will automatically reset itself.
FOR ANY OTHER PROBLEMS OR ISSUES
Contact ANEST IWATA-MEDEA at 503-253-7308 or email at: info@iwata-medea.com
All manuals and user guides at all-guides.com
TROUBLESHOOTING
8