Anest Iwata SPRINT JET IS800 Manuel D'instructions D'utilisation page 4

Unpack the compressor
and all components:
- Iwata Smart Jet Airbrush
Compressor
- Coiled Air hose (IS130)
- Air Hose
- International Plugs (IS850SA only)
- Regulator and Moisture Trap
Assembly
- Replacement Air Intake Filter
- Air Hose Adapters
(for use with Badger, Aztec and
Paasche airbrushes)
- Operating Instruction Manual
VOLTAGE CAUTION
- READ CAREFULLY -
If you bought the compressor in
the country you're going to use
it, it's completely ready to go.
If you're going to transfer the
compressor to another country
with a different voltage, you'll
need a plug adapter and the
appropriate power converter,
though this is not recommended.
WARNING: Using a plug
adapter and power converter
may cause unit to overheat.
Any issues resulting from
the use of a power adapter
and/or power converter
are not covered under the
Anest Iwata-Medea warranty.
All manuals and user guides at all-guides.com
IS850 SMART JET — ASSEMBLY INSTRUCTIONS
Air hose
(IS130)
Air pressure
regulator
Air pressure gauge
Air outlet
Moisture filter
Moisture drain valve
Air hose
Auto stop
pressure switch
4
International plugs
IS850SA Only
Handle
On/Off switch
Condenser Cover
Fan Cover
Plug
Rubber stand
Air intake filter
DO NOT USE OIL
IN OR ON THE
COMPRESSOR