Publicité
Les langues disponibles
Les langues disponibles
2) Specific Failure & Solution
Failure
The LED does not
come on when unit
is plugged in.
Some buttons can't
work, or the LED
display is not normal.
The Cooking Mode
Indicator comes on,
but heating does not
start.
Heating stops
suddenly during
operation and the
display flashes "u".
Heating zones of the
same side ( Such as
the first and the
second zone ) would
display "u" .
Fan motor sounds
abnormal.
The above are the judgment and inspection of common failures.
Please do not disassemble the unit by yourself to avoid any dangers and
damages to the induction hob.
Problem
No power supplied.
The accessorial
power board and
the display board
connected failure.
The accessorial
power board is
damaged.
The display board
is damaged.
The display board
is damaged.
High temperature
of the hob.
There is something
wrong with the
fan.
The power board is
damaged.
Pan Type is wrong.
Pot diameter is
too small.
Cooker has
overheated;
The power board and
the display board
connected failure;
The display board of
communicate part is
damaged.
The Main board is
damaged.
The fan motor is
damaged.
EN-38
Solution A
Check to see if plug
is secured tightly in
outlet and that
outlet is working.
Check the
connection.
Replace the
accessorial power
board.
Replace the display
board.
Replace the
display board.
Ambient temperature
may be too high. Air
Intake or Air Vent
may be blocked.
Check whether the
fan runs smoothly；if
not , replace the fan.
Replace the power
board.
Use the proper pot
(refer to the
instruction manual.)
Unit is overheated.
Wait for temperature
to return to normal.
Push "ON/OFF"
button to restart unit.
Check the
connection.
Replace the
display board.
Replace the power
board.
Replace the fan.
Solution B
Pan
detection
circuit is
damaged,
replace the
power
board.
Publicité
