Télécharger Imprimer la page

Amsta AMTI641F Manuel D'instructions page 79

Table de cuisson induction

Publicité

Les langues disponibles

Les langues disponibles

Care and Cleaning
What?
Everyday soiling
on glass
(fingerprints,
marks, stains
left by food or
non-sugary
spillovers on the
glass)
Boilovers, melts,
and hot sugary
spills on the
glass
Spillovers on the
touch controls
How?
1. Switch the power to the
cooktop off.
2. Apply a cooktop cleaner
while the glass is still
warm (but not hot!)
3. Rinse and wipe dry with a
clean cloth or paper towel.
4. Switch the power to the
cooktop back on.
Remove these immediately
with a fish slice, palette
knife or razor blade scraper
suitable for Induction glass
cooktops, but beware of hot
cooking zone surfaces:
1. Switch the power to the
cooktop off at the wall.
2. Hold the blade or utensil
at a 30°angle and scrape
the soiling or spill to a
cool area of the cooktop.
3. Clean the soiling or spill
up with a dish cloth or
paper towel.
4. Follow steps 2 to 4 for
'Everyday soiling on
glass' above.
1. Switch the power to the
cooktop off.
2. Soak up the spill
3. Wipe the touch control
area with a clean damp
sponge or cloth.
4. Wipe the area completely
dry with a paper towel.
5. Switch the power to the
cooktop back on.
• When the power to the
cooktop is switched off, there
will be no 'hot surface'
indication but the cooking
zone may still be hot! Take
extreme care.
• Heavy-duty scourers, some
nylon scourers and harsh/
abrasive cleaning agents may
scratch the glass. Always read
the label to check if your
cleaner or scourer is suitable.
• Never leave cleaning residue
on the cooktop: the glass may
become stained.
• Remove stains left by melts
and sugary food or spillovers
as soon as possible. If left to
cool on the glass, they may
be difficult to remove or even
permanently damage the
glass surface.
• Cut hazard: when the safety
cover is retracted, the blade
in a scraper is razor-sharp.
Use with extreme care and
always store safely and out of
reach of children.
• The cooktop may beep and
turn itself off, and the
touch controls may not
function while there is
liquid on them. Make sure
you wipe the touch control
area dry before turning the
cooktop back on.
EN-34
Important!

Publicité

loading