MSI MS-7597 Mode D'emploi page 25

adjust CPu Ratio
this item is used to adjust CPu clock multiplier (ratio). it is available only when the
processor supports this function.
adjusted CPu Frequency (MHz)
it shows the adjusted CPu frequency (FSB x Ratio). Read-only.
adjust CPu-nB Ratio
this item is used to adjust CPu-nB ratio.
adjusted CPu-nB Frequency (MHz)
it shows the adjusted CPu nB frequency. Read-only.
unlock CPu Core
this item is used to unlock the CPu core. Please refer to the procedures below for
CPu core unlocked in BioS setup.
enter "Cell Menu" and set "unlock CPu Core" to [enabled].
Save changes and exit the BioS setup.
System restart.
Success
you will see the "X4" (quad core) or "X2" (dual core for
Sempron series only) during PoSt.
aMd Phenom(tm) ii X4 Processor
aMd Sempron(tm) ii X2 Processor
iMPoRtant
* this CPu core unlocked behavior depends on the CPu ability/ characteristic,
and it is not guaranteed.
depend on CPu's characteristic, once you get instable scenario, please restore
*
the default settings for system.
* you can also check the core numbers in performance tab of Windows task man-
ager.
aMd turbo Core technology
this technology automatically increases the frequency of active CPu cores to
improve performance.
adjust turbo Core Ratio
this item is used to specific the turbo Core frequency multiplier.
adjusted turbo Core Freq. (MHz)
it shows the adjusted turbo Core frequency. Read-only.
Set "adjust CPu-nB Ratio" and
"Ht Link Speed" to [x8].
Clear CMoS data.
Fail
the CPu does not support CPu core
unlock, please leave the default settings
for system.
MS-7597
25