Klarstein STUDIO LIGHT & FIRE 3 SMART Mode D'emploi page 22

EN
22
CONTRIL PANEL
Timer
Heat controller
REMOTE CONTROL
Power button
Flame button
Arrow keys
Temperature
button
Flame controller
• Press this button to switch the unit on/off
• To adjust the flame brightness: Press this button once
and then adjust the flame brightness using the arrow
buttons.
• To adjust the flame color: Press the Flame button
twice, then use the Arrow buttons to switch between
flame colors (C1 - C7).
• Press these buttons to select between the different
heating levels. The level you select is shown on the
heat indicator. When the small bar lights up, a low
heating level is set. When both bars are lit, a high
heating level is set.
• Press this button once and use the arrow buttons to
select the desired temperature (18 - 35 °C).
On/Off