Logitech QuickCam Communicate Deluxe V-UBE43 Manuel D'installation page 5

Logitech ® QuickCam ® Installation
5
. The .Audio .Tuning .Wizard
The first time that you start QuickCam, you are guided through the Microphone/
Speaker Setup Utility and Audio Tuning Wizard that lets you do the following:
• Select the audio input device (microphone)
and audio output device (speakers).
• Enable Acoustic Echo Cancellation (AEC)—recommended.
• Enable background suppression—recommended.
• Specify microphone input volume and speaker output volume.
• Test audio settings.
In situations with loud and irregular background noise, your voice can become
distorted when using noise suppression. If this occurs, disable noise suppression in
®
the QuickCam software.
Tip
To change these settings later, in the QuickCam
click the Settings button, and then click the Audio tab.
®
software,
English