EINHELL GC-BC 30 AS Mode D'emploi D'origine page 21

•
Check to see if all items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, please keep the packaging until
the end of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or suff ocating!
•
Petrol scythe mower
•
Guide pin
•
Operating handle
•
Operating handle retainer
•
Carrying strap
•
Trimming blade
•
Spool with nylon line
•
Driving plate
•
Pressure plate
•
Pressure plate cover
•
Nut M10 (left-hand thread)
•
Combined oil/petrol cylinder
•
Spark plug wrench
•
Allen wrench 4 mm
•
Allen wrench 5 mm
•
1 ea. tie wraps
•
Knurled screw M6
•
Protective hood for nylon line/trimming blade
•
Original operating instructions
•
Safety instructions
3. Proper use
The power scythe (using the cutting blade) is
designed for cutting young trees, strong weeds
and undergrowth. The power trimmer (using the
line spool with cutting line) is designed for cutting
lawns, grassed areas and small weeds. The ope-
rating instructions as supplied by the manufactu-
rer must be obeyed to ensure that the equipment
is used properly. Any use which is not expressly
permitted in the manual may result in damage
to the equipment and place the user in serious
danger. Be sure to observe the restrictions in the
safety instructions.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
equipment is used in commercial, trade or indust-
rial businesses or for equivalent purposes.
Anl_GC_BC_25_30_AS_SPK1.indb 21 Anl_GC_BC_25_30_AS_SPK1.indb 21
GB
Important. Due to the high risk of bodily injury
to the user, the petrol power scythe must not be
used to carry out the following work: to clean dirt
and debris off walkways, or to chop up tree or
hedge clippings. Similarly, the petrol power scythe
must not be used to level out high areas such as
molehills. For safety reasons, the petrol power
scythe must not be used as a drive unit for other
work tools or toolkits of any kind.
The equipment is allowed to be used only for its
prescribed purpose. Any other use is deemed to
be a case of misuse. The user/operator and not
the manufacturer will be liable for any damage or
injuries of any kind resulting from such misuse.
4. Technical data
GC-BC 25 AS
Engine type .........................................................
........ 2-stroke engine, air-cooled, chrome cylinder
Engine power (max.) ................... 0.8 kW (1.1 HP)
Displacement ...........................................27 ccm
Idle speed of engine .................. 3100 ∓ 200 min
Max. engine speed...............................9500 min
Max. torque
Scythe: ................................................7200 min
Trimmer: ..............................................6400 min
Ignition .................................................Electronic
Drive ........................................Centrifugal clutch
Weight (with empty tank) ............................6.1 kg
Cutting line diameter ...................................45 cm
Cutting circle diameter of blade ..................23 cm
Cutting line length ......................................... 4 m
Cutting line diameter: ................................. 2 mm
Tank capacity ................................................0.4 l
Spark plug ................................................ L8RTC
Danger!
Sound and vibration
L sound pressure level ........................ 95 dB(A)
pA
K uncertainty ............................................. 3 dB
pA
L sound power level ........................ 114 dB(A)
WA
K uncertainty ............................................. 3 dB
WA
Wear ear-muff s.
The impact of noise can cause damage to hea-
ring.
- 21 -
-1
-1
-1
-1
21.10.2016 11:59:28 21.10.2016 11:59:28