Publicité
Les langues disponibles
Les langues disponibles
2
Maintenance
If you notice reduced flow or the outlet
temperature fluctuating, the cartridge screens
may need cleaned. To clean the cartridge
screens:
Shut off water from the main valve or from stops
(1). Stops may be accessed after removing
trim. Remove the handle (2), screw cover (3),
trim sleeve (4), escutcheon (5) and unscrew
bonnet nut (6). Carefully pull cartridge and sleeve
assembly (7) from the valve body (8). Carefully
brush or wash away any debris that may be on
the screens (9). After cleaning, reinstall cartridge
and sleeve assembly back into the valve body,
making sure to align the "V" (10) on the sleeve
with the "V" groove (11) on the valve body (Note
the "UP" on the sleeve). Secure cartridge and
sleeve assembly by screwing the bonnet securely
onto the valve body. Turn the stops on, and
reassemble remaining parts.
4
3
7
10
10
7
6
5
Cleaning and Care
Care should be given to the cleaning of this
product. Although its finish is extremely durable,
it can be damaged by harsh abrasives or polish.
To clean, simply wipe gently with a damp cloth
and blot dry with a soft towel.
11
1
1
8
9
91844 Rev. C
Publicité
