Brizo VETTIS T66T088 Serie Instructions D'installation

Model
T66T088
p
Series
VETTIS
™
pSpecify Finish
Register Online
www.brizo.com/customer-support/product-registration
To reference replacement parts and access additional
technical documents and product info, visit www.brizo.com
?
1-877-345-BRIZO (2749)
brizosupport@brizo.com
Read all instructions prior to installation.
Failure to read these instructions prior to installation may result in personal
injury, property damage, or product failure. Manufacturer assumes no
responsibility for product failure due to improper installation.
You may need:
CAUTION: This system/device must be set by the installer
to ensure safe, maximum temperature. Any change in the
setting may raise the discharge temperature above the limit
considered safe and may lead to hot water burns.
NOTICE TO INSTALLER: CAUTION!–As the installer
of this valve, it is your responsibility to properly
INSTALL and ADJUST this valve per the instructions
given. This valve does not automatically adjust for
inlet temperature changes, therefore, someone must
make the necessary temperature knob adjustments
at the time of installation and further adjustments
may be necessary due to seasonal water temperature
change. YOU MUST inform the owner/user of this
requirement by following the instructions. If you or
the owner/user are unsure how to properly make these
adjustments, please refer to page 4 and if still uncertain,
call us at 1-877-345-BRIZO (2749).
After installation and adjustment, you must affix your
name, company name and the date you adjusted the
temperature knob to the caution label provided and
apply or attach the label to the back side of the closest
cabinet door and the warning label to the water heater.
91844
!
CAUTION
!
SENSORI
VALVE TRIM
T E FLO N
Leave this Instruction Sheet for the owner's/user's
reference.
WARNING: This thermostatic bath valve is designed
to minimize the effects of outlet water temperature
changes due to inlet temperature changes, commonly
caused by dishwashers, washing machines, toilets
and the like. It may not provide protection from
hot water burns when there is a failure of other
temperature controlling devices elsewhere in the
plumbing system, if the temperature knob is not
properly set or if the hot water temperature is changed
after the settings are made or if the water inlet changes
due to seasonal changes.
WARNING: Do not install a shut-off device on either
outlet of this valve. When this type of device shuts off
the water flow, it can defeat the ability of the valve to
balance the hot and cold water pressures.
1
THERMOSTATIC
®
3/32"
(2.38mm)
8/8/19 Rev. C