Skil PWRCORE 20 VA593601 Guide D'utilisation page 15

Cleaning the Filter Assembly
a. Remove the filter assembly from the dust
canister: refer to Cleaning the Dust Canister.
b. Remove the filter cover from the filter seal
(Fig.7a).
c. Remove the fabric filter along with its filter
basket and brush the fabric cover with a soft
brush. If necessary, you can wet clean the
fabric cover (Fig.7b).
d. Remove the fabric filter from the filter basket
and wash both parts under running water.
e. Squeeze the water out of the fabric filter and
allow the fabric filter and filter basket to dry
fully, in order to avoid the formation of mold,
before reassembly.
f. Reassembly is carried out in reverse order.
WARNING
reassembling. The penetration of liquid may
increase the risk of fire.
Make sure that the filter
assembly is dry when
Fig. 7a
Remove
Fig. 7b
Fabric Filter
Filter Seal
Filter Cover
Filter Brasket
15