Skil PWRCORE 20 VA593601 Guide D'utilisation page 14

Cleaning the Dust Canister (Fig .6)
To maintain optimal performance of the vacuum, clean the dust canister after each use .
a. Press the dust-canister release button and remove the dust canister from the motor
housing.
b. Remove the filter assembly from the dust canister.
c. Shake/tap out the dust canister over a suitable waste bin. If required, clean the dust canister
with a moist cloth.
d. If required, clean the filter assembly (refer to Cleaning the Filter Assembly).
e. Reinsert the dust canister into the motor housing, applying light pressure until the dust
canister can be heard to engage.
Fig. 6
14
Filter Assembly