Skil PWRCORE 20 VA593601 Guide D'utilisation page 13

Installing and Removing Nozzles
(Fig .3)
To install, firmly insert one of the nozzles
completely into the intake port on the dust
canister.
To remove, simply pull the nozzle out of the
dust canister.
Installing and Removing the
Extension Tube (Fig .4)
To install, firmly insert the extension tube
completely into the intake port on the dust
canister, then insert one of the nozzles into the
tube.
To remove, simply pull the extension tube out
of the dust canister.
ON/OFF Switch (Fig .5)
Hold the tool firmly by the soft grip handle.
To turn the tool ON, push the on/off switch
forward, marked "I".
To turn the tool OFF, push the on/off switch
backward, marked "O".
WARNING
accidental starts and accidental discharge .
After tool use, switch off
the tool to help prevent
Fig. 3
Fig. 4
Fig. 5
Forward
Backward
13