WA RM
1.
Place wire rack in the upper rack position .
2.
Select the WARM function using the function knob.
3.
Turning the TIME knob, adjust time to set cook time. You may choose STAY
ON so the oven does not stop warming until you press Stop. To choose STAY
ON, turn the time knob counterclockwise past 0 (zero) until you see "ON".
4.
Place food on rack or in pan. Press the Time knob (I/O) to begin warming.
5.
There will be 3 audible beeps once the warming cycle is complete. The oven
will stop warming.
6.
Unplug the appliance when not in use.
RE H EAT
1.
Place wire rack in the upper rack position .
2.
Select the REHEAT function using the function knob. You are not able to deselect
NO PREHEAT. If you would like to preheat the oven or reheat without convection,
please refer to TRADITIONAL BAKE instructions.
3.
Turning the TEMP knob, adjust temperature to recommended temperature.
4.
Turning the TIME knob, adjust time to set cook time. You may choose STAY
ON so the oven does not stop cooking until you press Stop. To choose STAY
ON, turn the time knob counterclockwise past 0 (zero) until you see "ON".
5.
Place food or pan directly on rack. Press the Time knob (I/O) to begin cooking.
6.
There will be 3 audible beeps once the baking cycle is complete and the oven
will stop heating.
7.
Unplug the appliance when not in use.
STAY O N
The STAY ON function is available for BAKE, ROAST, WARM, REHEAT,
and NO PREHEAT. To set the oven to STAY ON, turn the TIME knob
counterclockwise past 0 (zero) until you see "ON" in the display panel. The
oven will stay on until the Time knob (I/O) is pressed.
11