Télécharger Imprimer la page

SEVERIN CY7086 Mode D'emploi page 25

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 26
Problem
The appliance hardly picks up any
dirt and/or the suction power drops
noticeably
The appliance hardly picks up any
dirt and/or the suction power drops
noticeably
If this table does not help, please contact our customer service.
The contact information can be found in the appendix to this instruction manual or at www.severin.com.
7 Disposal
Appliances marked with this symbol must be disposed of separately from household waste.
These appliances contain valuable raw materials that can be recycled. Proper disposal protects
the environment and the health of your fellow men. Your local authorities or dealer can provide
information regarding proper disposal.
8 Warranty
The legal warranty rights with respect to the seller and any seller warranties are unaffected by the following
warranty conditions.
If repair should be necessary, contact our customer service via telephone or e-mail. The contact information
can be found in the appendix to this instruction manual.
In case of warranty claim, you can also contact the dealer directly.
In addition, SEVERIN grants a manufacturer's warranty of two years from the date of purchase. During this
period, we will eliminate all defects caused by material or production faults that significantly compromise the
function free of charge. Other claims are excluded.
Excepted from the warranty are: Damage that is due to non-observance of the instruction manual, improper
handling or normal wear; also easily-breakable parts such as glass, plastic or light bulbs. If the appliance is
tampered with by persons not authorised by SEVERIN, this will render the warranty null and void.
Attached nozzle may be unsuitable for the floor to be cleaned.
Select and attach correct nozzle.
When the floor nozzle is attached, the "carpet/hard floor" selector is in
the wrong position for the particular type of floor.
Select correct switch position.
Suction power setting may not be appropriate for the type of floor.
Set correct suction power.
The dust container must be emptied ("Emptying the dust container" on
page 21). It is recommended to use this opportunity to also clean the
filters ("Cleaning the dual motor filter" on page 22, "Cleaning the fil-
ter screen" on page 22, "Cleaning the exhaust filter" on page 23).
Cause/Solution
D
isPosal
25

Publicité

loading