Programming Brew Size; Programming On/Off Features - Keurig OfficePRO Premier B155 Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Programming Your Brew Size
All brew sizes are enabled in the default setting. If you want to disable any
brew size, just press on the appropriate icon(s). Please follow instructions
outlined below.
From the Menu Mode, press
1.
15
fig.
"SET BREW SIZE(S)".
2.
The LCD will display all enabled brew sizes.
To disable a brew size press the icon. The
OK
check mark will change to an "X" indicating
that the brew size is disabled (fig. 15).
3.
Once you have selected your desired brew
4 OZ.
8 OZ.
size(s), press "OK". The brew size(s) are now
set.
NOTE: You can not delete all brew sizes.
6 OZ.
10 OZ.
To enable a brew size you have already
disabled, just press its icon and then
press "OK". The default brew size is
always 8 oz. This brew size cannot be
changed or disabled.

Programming On/Off Features

The Brewer provides three modes so that you can enjoy gourmet coffee, tea
or hot cocoa on your own schedule.
1. Leave it ON all the time.
16
fig.
on all the time so that it is always ready to
brew a fresh cup of gourmet coffee, tea or hot
cocoa. To turn the Brewer off at any time,
ON/OFF Time
simply press and release the Power Switch.
ON 12:00 AM
Press and release the Power Switch again to
H
M
restore power to the Brewer. You will have to
wait for the water to heat up before the Brewer
OFF 12:00 PM
is ready to brew.
H
M
2.
Program the Brewer for a specific On/Off
OK
Time.
the clock must be set to the correct time.
a. After setting the correct time (see "Setting The Clock" page 12), return to
the Menu Mode and press "ON/OFF TIME".
b. To set the ON time, press "DISABLED". The display will change to a time of
day. Press "H" to set the hours and "M" to set the minutes. Once the
desired time is set, press "OK" to accept this time.
c . To set the OFF time, press "DISABLED". The display will change to a time
of day. Press "H" to set the hours and "M" to set the minutes. Once the
desired time is set, press "OK" to accept this time (fig. 16).
13
The Brewer can be left
NOTE: To use this programming feature,

Publicité

Chapitres

Table des Matières
loading

Table des Matières