Set-Up; Helpful Hints; Unpacking - Keurig OfficePRO Premier B155 Manuel D'utilisation

Set-up

Helpful Hints

1. Keep your Brewer turned "ON" at all times.
To brew a fresh cup of coffee, tea or hot cocoa
anytime you want, we suggest you keep your
Brewer turned "ON" all the time. However, the
Brewer is fully programmable so you can set it
to turn on and off automatically to match your
schedule. Or, if you prefer, set the Brewer to
automatically turn off after a period of time.
Follow the simple instructions on pages 13–14
to make using the Brewer convenient for you.
2. For the best tasting gourmet coffee, tea or
hot cocoa, Keurig recommends using bottled
water or the Keurig ™ Water Filter Starter Kit
(available at www.keurig.com).
Water quality varies from place to place. If you
notice an undesirable taste in your cup of
coffee, such as chlorine or other mineral tastes,
we recommend you consider using bottled
water or water from a filtration system.
3. Customize the Size, Flavor & Brew That's
Perfect for You.™
With the choice of over 200 varieties of K-Cup
packs and 4 brew sizes (Small Cup-4 oz., Small
Mug-6 oz., Medium Mug-8 oz., and Large Mug-
10 oz.) your Keurig ® Brewer gives you endless
options to customize the size, flavor and brew
that's perfect for you. For a strong, intense cup,
select an Extra Bold K-Cup ®
30% more ground coffee than regular variet-
ies) and brew the size that's right for you. The
smaller the brew size, the more intense flavor
in your cup. The larger the brew size, the less
intense flavor in your cup.
4. Plug Brewer into its own grounded outlet.
If the electric circuit is overloaded with other
appliances, your Brewer may not function
properly. The Brewer should be operated on its
own circuit, separate from other appliances.
5. Brewing into a travel mug.
To brew into a travel mug, simply remove the
Drip Tray Assembly and place the travel mug
on the Drip Tray Base.
6. De-scale Brewer regularly.
Please see pages 16 and 17 for instructions.
Unpacking Instructions
Place Brewer box on a large steady surface
1.
®
(such as a table or countertop) or on the floor.
Open the box.
2. Remove enclosed literature and K-Cup
variety pack.
4
Turn the box on its side with the front of the
3.
box face down.
pack (with up to
Reach into the box and grasp the foam insert
4.
that contains the Brewer.
5. Carefully pull the foam insert toward you
and out of the box. The Brewer will still be
encased in the polyfoam and be on its side.
Remove the top polyfoam packaging material.
6.
Carefully lift Brewer off of the bottom polyfoam
7.
and place it upright on a flat, steady surface.
Lift plastic bag off of Brewer.
8.
Record the serial number for this Brewer on
9.
page 3 of this guide. The serial number can be
found on the side of the Brewer box or on the
bottom of the Brewer.
Place the Brewer upright on a flat, steady
10.
surface. Remove tape holding Water Reservoir
in place.
We recommend you save all packing materials in
case future shipping of the product is necessary.
Keep all plastic bags away
®
WARNING:
from children.