Publicité
Les langues disponibles
Les langues disponibles
2. Place the blower (air pump) where it will not inhale
dust or leaves, and keep the blower (air pump) and
power cord away from children and water. Note: Please
make sure the power supply is safe and reliable. During
use, the blower (air pump) should remain on and
continue to inflate. After stretching the air pipe, position
the blower (air pump) at the end of the air pipe. Wind one
end of the tube around the blower (air pump), blow out
the air after tying. The inflation tube should be straight
and not twisted. If necessary, adjust the position of the
blower (air pump). Then use ground piles to firmly fix the
blower (air pump) on the ground.
3. Please fix the product correctly, and be sure to fix the
product with ground stakes before use. In order to
prevent overturning during the game, please push the
pile firmly into the ground, and regularly check whether
the ground pile is firm. Ground piles should be flush with
the ground or buried in the ground to reduce the risk of
tripping. Please ensure that the product is fully inflated before children enter
the playground. Using this product when inflated or excessively deflated may
cause product instability and may cause serious injury. Since the product is
kept inflated by a constant air flow, air leakage from the joint is normal and
necessary, so the product will not over-expand.
08
Maintenance Instruction
Outdoor products are easy to wear and
require proper maintenance. When the fabric
is found to be invalid, fragile or damaged, it
must be repaired in time, and the provided
patch can be used to repair it. To repair,
deflate thoroughly and make sure the
surface is dry. Cut the patch to fit the patch.
Apply glue on both the repair patch and the
damaged surface, let the glue dry for 30
seconds, and then stick the patch on the
surface. Allow to dry at least 4 hours before
using. Store the product and blower in a dry
environment when not in use.
Disassembly Instructions
1. Make sure that after all children leave the product, turn off the blower (air
pump), remove the inflation tube, unplug the power cord of the blower (air
pump), remove the ground pile, and store the blower (air pump) in a dry
place for future use. When the product is not in use, do not put the product
and the blower (air pump) in the rain
2. After discharging the air completely, fold the product for storage.
Wrong
Right
09
Publicité
