Publicité
Les langues disponibles
Les langues disponibles
Product Use / Robot Charging
1.Placing and charging :Place charging station against the wall and on a flat ground.
Do not place items within the range of 0.5m left and right and 1.5m in front.
2.Connect the power supply.
3.lnstalling side brush: lnstall the side brush according to the left and right (UR).
4. Charging: Place the Robot on the charging station for charging During charging, the
indicator light flashes. When the charging is over, the light remains on. The charging
time is about 5 hours.
During the c leaning proc ess, the Robot will automatic ally switc h to "Rec harging"
mode when the battery is low and automatic ally finds the c harging station to
c harge. You c an also c ommand the Robot to switc h to "Rec harging" mode through
the "Rec harging" button on the remote c ontrol.
0
Charging attention:
1.The charging station cannot be used in environments with streng refleclion such as
direct sunlight and nearby mirrors.
lf there is any object with streng reflec tion, please cover it 7 cm from the bottom.
2.In order to ensure that the Robot operates in full, please fully charge it before use. The
charging time is about 5 hours.
3.When charging, do not attach the water tank to ensure the safety of charging and
prevent wet rags from damaging the floor.
06
EN
@
Publicité
