Jam Ultra HX-EP910 Livret D'instructions page 4

CONNECT 1 EARBUD
1x
Connect only 1 earbud for mono sound. This
is a great option if you want to hear your
surroundings as well as your music.
STEP 1 – TURN ON 1 EARBUD
Your earbud will automatically turn on when
taken out of the portable charging case. If you
need to turn it on manually, you can quick-press
the "play/pause" button once on the earbud.
Note: To connect to 1 earbud only, you must only
have 1 earbud powered on.
2s
STEP 2 – PAIRING MODE
Once the earbud is powered on, wait for 5
seconds, the LED will flash red and blue. This will
indicate your earbud is in single pairing mode.
EN
Bluetooth
Devices
ULTRA
Bluetooth
Devices
ULTRA MONO
STEP 3 – CONNECTING TO A DEVICE
Enable Bluetooth on your device. From the
Bluetooth menu, and depending on which earbud
you are connecting to, select "Ultra" for the left
earbud, or "Ultra Mono" for the right earbud.
When the device and Ultra are connected, you
will hear a tone. This means pairing is complete.
Note: When using only 1 earbud, you can
power on the other earbud and go back to
stereo sound. You may need to reconnect to
your device from the Bluetooth menu.
TURNING OFF YOUR EARBUDS
5s
To turn off your earbuds, place the earbuds back
in your case, or press and hold the "play/pause"
button on the earbuds for 5 seconds.
OR
4