Publicité
FRANÇAIS
MAIN MENU
RED
GREEN
BLUE
AMBER
LIME
CYAN
STROBE
STATIC
DIMMER
CCT PRESETS
COL PRESETS
ADDRESS
001-512 (default 001)
DMX (default)
RUN MODE
STATIC
SLAVE
BASIC
SSP
TOUR (default)
PERSONALITY
TR16
HSIC
CMY
AUTO 1
AUTO 2
AUTO
...
PROGRAM
AUTO 10
PR 1
PR 2
PROGRAM
EDIT
1-2
UPLOAD
SETTING
****
INFO
RDM
BRITEQ
®
SUB MENUS + VALUE SETTINGS
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-255
NONE + 1800K → 10000K
NONE + COL 1 → COL 48
0-255
0-255
0-255
0-255
RED
GREEN
BLUE
AMBER
SCENE
01-10
LIME
STROBE
TIME
FADE
****
SEND
RESET
****
DIM4 (default)
DIMMER
OFF
SAVE (default)
DMX ERROR
BLACK
1200Hz (default)
2400Hz
LED PWM
4000Hz
6000Hz
25000Hz
LIVE (default)
PERFORM
POWER
STUDIO
ON (default)
DISP KEY
OFF
ON
10s
DISP TIME
30s (default)
2min
****
FIXTURE HOURS
****
VERSION
5/10
MANUEL D'UTILISATION V1.0
Combine [RED][GREEN][BLUE][LIME][AMBER][CYAN]
create an infinite range of colors (0-255).
PS: Color settings are not used when a CCT or COLOR
PRESET is selected.
Set the value of the [STROBE](0-25Hz).
Master dimmer of all static colors and presets
The different CCT values can be selected in static
mode. Choose "NONE" if you want to use the
separate color settings or color presets.
The 48 color presets can be selected in static mode.
Choose "NONE" if you want to use the separate color
settings or CCT-presets.
Set the DMX ADDRESS
[DMX] Using the DMX 512 controller to control
[SLAVE] Master/Slave operation.
[STATIC] use the settings from the STATIC menu.
Use the menu to select desired channel mode
Selects automatic AUTO program and AUTO
program speed.
Programs [CUSTOM 1] to [CUSTOM 2] are fully
pre-programmed and can be edited in [EDIT]
0-255
Enter the [EDIT] mode to edit the custom
0-255
programs [PROGRAM01] to [PROGRAM2].
0-255
Each custom program has 30 scenes that can
0-255
0-255
Fade transition time, time 0-255 unit is second,
fade time setting should be less than time
0-25
0-255
After editing the program, Play in AUTO.
0-255
Select [UPLOAD] to upload the custom programs
RESET
Restore factory settings
Dimming curves DIM1 (fast) to DIM4 (slow)
Hold after loss of DMX signal
Blackout after loss of DMX signal
Sets the PWM frequency
Fan mode low speed
Fast rotation of fan
Automatic rotation of fan
Locks display (passcode is :
<UP>, <DOWN >, <UP>, <DOWN>, <ENTER>)
Display backlight always on
Turns off display backlight after:
10s/30s/2min of inactivity
Hours of fixture use
Software versions
REMARKS
to
mode.
be edited.
setting.
；
，
all power
BTI-CYCLO
Publicité
