Cautions
Battery Pack
The supplied battery pack is a
lithium-ion battery. Before using
the supplied battery pack or an
optional battery pack, be sure
to read the following cautions:
•
To avoid hazards
... do not burn.
... do not short-circuit the terminals. Keep it away
from metallic objects when not in use. When
transporting, carry the battery in a plastic bag.
... do not modify or disassemble.
... do not expose the battery to temperatures
exceeding 60°C, as this may cause the battery
to overheat, explode or catch fire.
... use only specified chargers.
•
To prevent damage and prolong service life
... do not subject to unnecessary shock.
... charge within the temperature range of 10°C
to 35°C. Cooler temperatures require longer
charging time, or in some cases stop charging
at all.
Warmer temperatures prevent complete
charging, or in some cases stop charging at all.
... store in a cool, dry place. Extended exposure
to high temperatures will increase natural
discharge and shorten service life.
... fully charge and then fully discharge the battery
every 6 months when storing the battery pack
over a long period of time.
... remove from charger or powered unit when not
in use, as some machines use current even
when switched off.
For more information, refer to the Detailed User Guide
24
http://manual.jvc.co.jp/index.html/
Recording Medium
•
Be sure to follow the guidelines below
Terminals
to prevent corruption or damage to your
recorded data.
•
•
•
•
•
•
•
•
When formatting or erasing data using
this unit, only the file administration
information is changed. The data is not
completely erased from the hard disk. If
you want to completely erase all of the
data, we recommend either using
commercially available software that is
specially designed for that purpose, or by
physically destroying the unit with a
hammer etc.
Hard Disk
•
Do not use the unit where it is subject to
vibrations or loud sounds.
•
If you move the unit suddenly, the drop
detection function may operate and the
power may be turned off.
LCD Monitor
•
To prevent damage to the LCD monitor,
DO NOT
... push it strongly or apply any shocks.
... place this unit with LCD monitor on the
bottom.
•
To prolong service life
... avoid rubbing it with coarse cloth.
Do not bend or drop the recording medium,
or subject it to strong pressure, jolts or
vibrations.
Do not splash the recording medium with
water.
Do not use, replace, or store the recording
medium in locations that are exposed to
strong static electricity or electrical noise.
Do not turn off this unit's power or remove
the battery or AC adapter during shooting,
playback, or when otherwise accessing
the recording medium.
Do not bring the recording medium near
objects that have a strong magnetic field or
that emit strong electromagnetic waves.
Do not store the recording medium in
locations with high temperature or high
humidity.
Do not touch the metal parts.