Publicité
Les langues disponibles
Les langues disponibles
Replacing the fuse
If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating.
Before replacing the fuse, unplug mains lead.
Procedure:
Step 1: Unscrew the fuseholder with a fitting screwdriver from the housing (anti-clockwise).
Step 2: Remove the old fuse from the fuseholder.
Step 3: Install the new fuse in the fuseholder.
Step 4: Replace the fuseholder in the housing and fix it.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by authorized dealers only
in order to avoid hazards.
Should you have further questions, please contact your dealer.
TECHNICAL SPECIFICATIONS
Power supply:
Power consumption:
Sound-control:
Dimensions (LxWxH):
Weight:
Maximum ambient temperature T
Maximum housing temperature T
Fuse:
Minimum distance:
Number of channels:
Number of LEDs:
Please note: Every information is subject to change without prior notice. 11.08.2006 ©
230 V AC, 50 Hz ~
35 W
via built-in microphone
125 x 455 x 240 mm
4 kg
:
45° C
a
(steady state):
60° C
B
F 0.5 A, 250 V
0,10 m
5
252
20/37
51913860_V_1_0.DOC
Publicité
