Husqvarna TC 238T Manuel D'utilisation page 11

Loose parts for the grass catcher
The product is not fully assembled. The parts that
follow are loose when the product is purchased.
Latch
Full lever/extension
Support brackets
Offset strut
Latch extension spring
Grass catcher presence lever
5/16 x 18 x 1.5" Carriage bolts
5/16 x 18 Lock nuts
Full lever shroud
10-24 x 1/2 Buttonhead screw
Cross brace
2010 - 004 - 14.07.2023
Grass catcher handle
Clevis pin
Clip
3/8 x 16 x 3/4 Screw
10-24 Nut
Front frame
Pivot
3/8 x 16 x 1" Nut
3/8 x 16 x 1" Carriage bolts
To assemble the grass catcher
1. Unfold the bag and put it right side up.
2. Remove the 2 screws and the 2 nuts (A) from the
front of the top frame.
A
3. Put the grass catcher on the side.
11