Inventum HN186G Mode D'emploi page 15

2
product description
1. Display
2. Switch
3. Heating pad
3
prescribed use
CAUTION
The heating pad is only intended for heating the human body.
4
operation
4.1 Safety
CAUTION
• The heating pad has been provided with a SAFETY SYSTEM. This sensor technology prevents overheating of the heating
pad on the entire surface through automatic deactivation in case of breakdowns. When the SAFETY SYSTEM has switched
off the heating pad, the temperature levels in in activated condition are no longer lighted.
• Do note that for reasons of safety the heating pad can no longer be used after a breakdown and should be sent
to the indicated service address.
• Never connect the faulty heating pad to a different switch of the same type. This would also ensure a final deactivation
through the safety system in the switch.
4.2 Use
CAUTION
Make sure the heating pad does not fold or crumple during use.
• First connect the switch to the connection point in the heating pad by connecting the plug.
• Then insert the plug in the socket.
4.3 Switching on
Press the ON / OFF button
To set the required heating position, press the + button. To lower the required heating position, press the - button.
to switch on the heating pad. The display switches on - position 1 - deactivation time 90 minutes.
1 2 3
English •
15