Publicité
Les langues disponibles
Les langues disponibles
CLEANING, MAINTENANCE AND STORAGE
Regulary wipe the enclosure using a soft sponge or cloth. For very dirty parts, use a sponge wetted
with lukewarm water and a mild detergent, then dry using a clean cloth.
Keep air inlet and fan free from dust and dirt. To clean inner parts, gently blow compressed air through
air inlet.
Regularly inspect the power cable: if worn, cracked or damaged have it replaced by technical service.
Before storing the heater, make sure it is perfectly cool and dry. Cover the unit with a plastic bag, put it
in its packing box and store it in a dry, ventilated place.
heater cool down for at least 15 minutes.
or repair, contact a qualified technician.
repaired it.
When cleaning, make sure that water does not enter the unit.
into the heater.
to clean the heater.
Notice
1、Before the maintenance shut off the heater and pull out the plug；
2、Never maintain the heater with fuel in tank.
◆ check the fuel tank
When there is waste and water in the tank, clean and drain the fuel tank.
How to drain the fuel tank
1、 put the heater on the working table and place an oil container under the fuel tank
2、 use a spanner to loose the drain screw und release the water and waste inside the tank；
3、 after draining tighten the drain screw again and wipe clean the left water and oil.
Before starting any maintenance task, shut down, unplug and let the
Do not attempt any electrical repair yourself. If the heater needs service
Do not use a faulty unit unless a qualified technician has inspected and
Do not open the enclosure to clean the inner parts. Do not spray water
Never use solvents, gasoline, toluene and similar aggressive chemicals
46
Publicité
