Samsung WA49B5205A Serie Mode D'emploi page 45

ATC (Auto Temperature Control)
ATC enables the washer to control water temperatures in each washing cycle using the
internal thermistor. It is designed to maintain certain washing temperatures for best
results.
NOTE
• If you select NORMAL or HEAVY DUTY , you may notice the washer supplying cold
water. This is normal because the machine is designed to reduce power consumption. In
these cycles, the water temperature for Level 5 is similar to bath-water temperatures,
and Level 3 is similar to comfortable swimming pool temperatures.
• To wash clothes at a specific temperature, you must choose a different cycle first.
Child Lock
The Child Lock function locks the washer door to prevent children from climbing into and
suffocating inside the tub.
Activating the Child Lock function
Press and hold Temp. and Rinse simultaneously for approximately 3 seconds.
• When you activate the Child Lock function, the
Using the Child Lock function
If the lid is opened when the Child Lock function is on, " dC " is displayed and an alarm
sounds.
• If the water level in the tub is above the safe water level, " dC " is displayed on the LED
display and the washer starts to drain water by force after 30 seconds.
• If the water level in the tub is above the safe water level and the Child Lock function is
turned on while the lid is open, " CL " is displayed on the LED display, even if the washer
is turned off, and the washer drains water by force.
• When Child Lock is on and the washer is off, if the water in the tub is above the safe
water level and the lid is opened, " CL " is displayed on the LED display. No alarm
sounds, but the washer drains the water. When the draining operation finishes, the
power automatically turns off again.
• If you activate the Child Lock function while the washer is running, the Start/Pause
(Hold to Start) button will not work.
• After the compulsory drain, " CL " blinks at 1 second intervals and the washer enters the
" CL " mode. (When the washer is in the " CL " mode, only the Power button works.)
• To cancel the " CL " mode, turn the power off and then on again.
• To cancel the " dC " mode, deactivate the Child Lock function. To deactivate the Child
Lock function, press and hold Temp. and Rinse simultaneously for at least 3 seconds.
Untitled-17 45 Untitled-17 45
Child Lock indicator blinks.
English 45
2023-06-22 2023-06-22 5:50:00 5:50:00