Publicité
Product: Loadpin LP
Product Description: Designed for use where and end of line loadcell cannot be used.
Built to withstand the harshest of environments in industries
such as offshore oil and gas, and suitable for use in exposed
situations.
Made from stainless stell and normally supplied with an anti-
rotation plate. Available from 0.5t to 1500t.
Requires connection to Crosby Straightpoint's Handheld plus
(HHP), or External Amplifier range (SA-3420) that can be
configured to provide outputs such as 4-20mA, 0-10v, 0-5v for
PLC or data logger integration.
Marking:
Manufacturer: Straightpoint (UK) Limited,
Unit 9, Dakota Park,
Downley Road,
Havant,
Hampshire,
PO9 2NJ, United Kingdom
This conformity is based upon compliance with the application of harmonized or applicable technical standards and, where applicable or
required, a European Union Notified Body certification.
Directives: The described product above, is in conformity with:
EU Machinery Directive 2006/42/EC;
EU EMC Directive 2014/30/EU
EU RoHS 2011/65/EU
Applicable Harmonised
EU Machinery Directive 2006/42/EC
Standards:
EN ISO 12100:2010 Safety of machinery - General principles for design – Risk assessment and risk reduction.
EMC Directive
BS EN 55011:2016+A11:2020 Industrial, scientific and medical equipment. Radio-frequency disturbance
characteristics. Limits and methods of measurement;
EN 61326-1 Electrical equipment for measurement, control and laboratory use, EMC requirements, Part 1, General
Requirements;
EN 61000-6-1 – Electromagnetic compatibility (EMC), Part 6.1, Generic Standards Immunity for residential,
commercial and light industrial environments.
RoHS
EN IEC 63000:2018 Technical documentation for the assessment of electrical and electronic products with respect
to the restriction of hazardous substances.
Notified Body: Self-declared.
Quality Management: ISO 9001:2015 Quality Management Systems Requirements: BSI Certificate No. FM 584438
Straightpoint (UK) Limited declare that under our sole responsibility for the manufacture and supply of the product detailed above, that it
conforms to the essential health and safety requirements of the listed applicable Directives and applicable harmonised technical Standards.
EU Authorised
CROSBY EUROPE
Representative:
Industriepark Zone B N°26
B-2220 Heist-op-den-Berg
Belgium
Phone: +32 0 15 75 71 25
Email:
SQS662 Issue 1Registered in England
October 2021
Registered
Office:
EU DECLARATION OF CONFORMITY
No.
4375389
·
VAT Registered
Unit
9.
Dakota Par
k. Down ley
R
d. Havant.
Hampshire P09 2NJ
Signed, on behalf of Authorised Representative:
Name: Thomas Dietvorst
Position: General Manager
Date: October 20
No.
793 2451 14
·
UK
th
2021
Publicité
