Publicité
Liens rapides
LP - Load Pin
ﺗﻌﻠﻳﻣﺎﺕ ﺍﻟﺗﺷﻐﻳﻝ
v1.00
Part No:
THIS MANUAL WAS WRITTEN IN THE ENGLISH LANGUAGE AND PROFESSIONALLY
SU3511
TRANSLATED TO ALL OTHER LANGUAGES CONTAINED WITHIN THIS DOCUMENT.
PLEASE NOTE THAT STRAIGHTPOINT ACCEPT NO RESPONSIBILITY FOR ANY ERRORS OR
OMISSIONS.
Publicité
Manuels Connexes pour Crosby SP LP - Load Pin
Sommaire des Matières pour Crosby SP LP - Load Pin
- Page 1 LP - Load Pin ﺗﻌﻠﻳﻣﺎﺕ ﺍﻟﺗﺷﻐﻳﻝ v1.00 Part No: THIS MANUAL WAS WRITTEN IN THE ENGLISH LANGUAGE AND PROFESSIONALLY SU3511 TRANSLATED TO ALL OTHER LANGUAGES CONTAINED WITHIN THIS DOCUMENT. PLEASE NOTE THAT STRAIGHTPOINT ACCEPT NO RESPONSIBILITY FOR ANY ERRORS OR OMISSIONS.
- Page 2 Made from stainless stell and normally supplied with an anti- rotation plate. Available from 0.5t to 1500t. Designed for use with Crosby Straightpoint handheld plus digital display (HHP). Marking: Manufacturer: Straightpoint (UK) Limited,...
- Page 3 Made from stainless stell and normally supplied with an anti- rotation plate. Available from 0.5t to 1500t. Requires connection to Crosby Straightpoint’s Handheld plus (HHP), or External Amplifier range (SA-3420) that can be configured to provide outputs such as 4-20mA, 0-10v, 0-5v for PLC or data logger integration.
- Page 4 Made from stainless stell and normally supplied with an anti- rotation plate. Available from 0.5t to 1500t. Designed for use with Crosby Straightpoint’s handheld plus digital display. Marking: Manufacturer: Straightpoint (UK) Limited,...
- Page 5 Made from stainless stell and normally supplied with an anti- rotation plate. Available from 0.5t to 1500t. Requires connection to Crosby Straightpoint’s Handheld plus (HHP) or External Amplifier range (SA-3420) that can be configured to provide outputs such as 4-20mA, 0-10v, 0-5v for PLC or data logger integration.
- Page 6 General description and warnings 01-04 LP installation guide 05-06 LP performance 07-08 LP usage and calibration 09-10 LP wireless version LP typical locations 12-13 Product aftercare 14-15 Service and calibration Warranty v1.00 Part No: SU3511...
- Page 7 All products manufactured and sold by Straightpoint Ltd, are sold with the express understanding that the purchaser and user are thoroughly familiar with the safe use, proper care and application of the product. Responsibility for the safe use, proper care and application of the product rests with the user. Failure of the product can occur due to misapplication, abuse, overloading, or improper care and maintenance.
- Page 8 Todos los productos que fabrica y vende Straightpoint Ltd se venden sabiendo explícitamente que el comprador y el usuario son plenamente conocedores de utilizar el producto de forma segura, cuidarlo y emplearlo. El usuario es responsable de utilizarlo de forma segura, cuidarlo y emplearlo. El mal funcionamiento del producto puede deberse a un uso indebido, abuso, sobrecarga, o cuidado y mantenimiento inadecuados.
- Page 9 Straightpoint Ltd Straightpoint Ltd : ASME B30.26-2010 « ». Straightpoint Ltd, Straightpoint Ltd Straightpoint Ltd. Straightpoint Ltd Straightpoint Ltd Όλα τα προϊόντα που κατασκευάζονται και πωλούνται από τι Straightpoint Ltd, πωλούνται ε τη ρητή επιφύλαξη ότι ο αγοραστή και ο χρήστη είναι πλήρω εξοικειω ένοι ε την ασφαλή χρήση, την κατάλληλη φροντίδα και την εφαρ ογή του προϊόντο . Η...
- Page 10 Alla produkter som tillverkas och säljs av Straightpoint Ltd säljs med uttryckliga hänvisningar om att köparen och användaren har god kännedom om säker användning, skötsel och tillämpningen av produkten. För säker användning, skötsel och tillämpningen av produkten ansvarar användaren. Felaktig användning, missbruk, överbelastning eller felaktig skötsel och underhåll kan leda till att produkten fördärvas. Det finns många statliga standarder och branschstandarder som omfattar produkterna som tillverkas och säljs av Straightpoint Ltd .
- Page 11 This is an installation guidance for the Straightpoint range of Load pins. It is recommended to follow the installation guide for better performance and accuracy of the load pins. Most load pins are made to order and this guide is generic and so standard engineering and rigging practices must be followed in addition to this guide.
- Page 12 Dit is een installatieleidraad voor de serie lastpennen van Straightpoint. Het is raadzaam om de installatiehandleiding te volgen voor betere prestaties en nauwkeurigheid van de lastpennen. De meeste lastpennen zijn volgens de specificaties van de order gemaakt. Deze handleiding is algemeen en dus moeten standaardengineering- en takelwerkwijzen worden gevolgd naast deze handleiding.
- Page 13 A rigid support structure is required to minimise the bending forces imparted on to the pin. The pin works by sensing the shear, and any bending stresses within the pin will degrade its overall accuracy. The fit of the pin within its mating holes is important in the overall performance of the load pin.
- Page 14 H7, G6. — (0–100%) — Απαιτείται ια άκα πτη κατασκευή στήριξη για την ελαχιστοποίηση των δυνά εων κά ψεω που εταδίδονται στον πείρο. Ο πείρο λειτουργεί ανιχνεύοντα τη διατ ητική τάση και οποιεσδήποτε τάσει κά ψεω στον πείρο θα υποβαθ ίσουν τη συνολική...
- Page 15 Straightpoint load pins has a wide variety of configurations made to meet exact requirements of the customer, like load pins with cable gland and cable, load pins with end box and connector, wireless load pins, load pins for the marine environment. At no point should the customer try to open or repair any load pins or part of load pins, including the cable gland, without prior consultation with Straightpoint technical advisors.
- Page 16 Straightpoint Straightpoint. Straightpoint που ικανοποιούν συγκεκρι ένε απαιτήσει του πελάτη, όπω πείρου φορτίου ε στυπιοθλίπτη καλωδίου και καλώδιο, πείρου φορτίου ε κυτίο τερ ατισ ού και συνδετήρα, ασύρ ατου πείρου φορτίου και πείρου φορτίου για θαλάσσιο περιβάλλον. Ο πελάτη δεν θα πρέπει ποτέ να ανοίξει ή να επισκευάσει του πείρου φορτίου ή τ ή ατα των πείρων φορτίου, συ περιλα βανο ένου του...
- Page 17 The wireless hand held or USB base station shall be in direct line of sight to the wireless enclosure fitted on the load pin. If this is not possible due to the onsite interference, Straightpoint can supply signal boosters. Please refer SW-HHP (SU3479) manual for more details on hand held. La télécommande sans fil ou la base USB doivent être en contact visuel direct avec le boîtier sans fil fixé...
- Page 18 Fork and Eye Turning Block v1.00 Part No: SU3511 Rope Sheave...
- Page 19 If a pin exists within a defined load path or can be fitted to experience a force, then a Straightpoint Load Pin can be installed to monitor that load. The sketches opposite show typical locations for load pins; Fork and Eye, Turning Block and Rope Sheave.
- Page 20 While these devices are sealed to IP67/NEMA6 standards. The effects of solvent on the device can not be guaranteed, and should therefore be avoided. Avoid use within 20-30 minutes of rapid changes in temperature, for example moving the device from a cold vehicle into a warm room. The change in temperature can affect the accuracy of the device.
- Page 21 IP67/NEMA6, 20-30 +50°C ( 14 122°F). «OLOAd» Αν και αυτέ οι συσκευέ φέρουν στεγανοποίηση σύ φωνα ε τα πρότυπα IP67/NEMA6, δεν θα πρέπει να βυθίζονται σε νερό. Η επίδραση διαλύτη στη συσκευή δεν είναι εγγυη ένη και θα πρέπει επο ένω να αποφεύγεται. Αποφύγετε...
- Page 22 These products are supplied with a certificate of calibration which is valid for one year. After this date, it is recommended the device is recalibrated by Straightpoint or an approved calibration laboratory. Contact the Straightpoint service department or your supplier for more information. In the unlikely event of this device failing, fit new batteries and re-test.
- Page 23 Straightpoint (UK) Ltd warranty this product against malfunction for a period of two years from manufacture. Conditions of warranty: 1) The equipment is used as described exactly in the operators manual supplied. 2) Whilst we make every effort to ensure each device is calibrated before despatch, Straightpoint (UK) Ltd do not accept responsibility for inaccurate readings indicated by this equipment. 3) In the event of malfunction, the device is returned to the manufacturer: Straightpoint (UK) Ltd, Unit 9 Dakota Park, Havant, Hampshire, UK, PO9 2NJ.
- Page 24 Crosby | Straightpoint Unit 9, Dakota Park, Downley Road, Havant, Hampshire, PO9 2NJ UK · Tel: +44 (0)2392 484491 2801 Dawson Road, Tulsa, OK 74110 · USA · Tel: +1 (918) 834-4611...