IGM FKP400 Mode D'emploi page 3

FOR ANGULAR DOWEL JOINTS
CONTENTS
Contents – Operating instructions/ Package
Description FKP400-656, FKP101-102, setting FKP101-102
Dowel joint producing
Confirmate joint producing
Safety at work
Spare parts list
Use of FKP400, 656 jig
The FKP 400 & FKP 656 jig is designed for production of furniture elements angular joints with dowels for
board thickness 18-45 mm or with confirmate screws of 40-50-60 mm for board thickness of 18-30 mm
together with boring bush FKP101 and FKP102 with any cordless or percussion drills. The clever boring bush
conception enables the use of one boring bush with a wide range of dowel bits with various boring diameters.
The FKP400 and FKP656 jig increases the quality and precision of dowel or confirmate screw joints. The
whole system is based on the use of boring jig made from eloxed duralumin and of boring bush in which a
dowel bit with HM cutting edge is clamped. Thanks to the simple construction, maximal precision of the
boring jig and boring bush you can produce a precise dowel or confirmate screw joint. The production of one
angular joint takes about 10 - 20 minutes, depending on the joint size.
Basic accessories FKP 400, 656
1 pc Boring jig made of eloxed duralumin with threading for stop tightening on both sides
2 pc Steel stops D10x10
2 pc Screw M4x16
1 pc Centering pin D8
2 pc Tightening flanges ( jig FKP400 only )
4 pc Screws M8x45 ( jig FKP400 only )
3 pc Tightening flanges ( jig FKP656 only )
6 pc Screws M8x45 ( jig FKP656 only )
Operating instructions
FKP400, 656
- EN 1 -
FKP400 , 656 Operating instructions
DOWEL JIG
TEXTS - V1
PAGE - PAGE -
TEXT FIGURES
EN1
EN2
EN3
EN4
EN5
EN5
A
B
B-C
C
D