Publicité
Les langues disponibles
Les langues disponibles
Installation
9) Use a Spirit Level Ruler to measure whether the hood is in a
horizontal level, and use two 4*30mm Screws to lock into the safety
hole position of the hood (not mandatory, according to user's wishes
to choose whether to lock).
COMPONENTS:
Part 2: 4*30mm Screws X 2
EN
10) Tear off the tape from the air outlet.
NOTE:
Make sure you remove the tape on the damper and check if the
damper opens and closes freely, otherwise it make noises, and the
cooker hood will be shaking.
4*30mm
Screws 2pcs
12
Spirit Level Ruler
Tape
Publicité
