Makita DCU603 Manuel D'instruction page 34

4. Make sure that the machine does not move, and
pull out the neutral change lever outward.
Fig.72
► 1. Neutral change lever
5. Unlock the brake lever and move the machine
manually to a safe place. Since the support brake is
disabled, move the machine carefully with the brake
lever so that the speed does not increase.
6. After moving the machine to a safe place, lock the
brake lever.
7. Return the neutral change lever to its original
position. Make sure that the neutral change lever is fully
returned as shown in the figure.
1
Fig.73
► 1. Neutral change lever
1
34
OPTIONAL
ACCESSORIES
CAUTION:
These accessories or attachments
are recommended for use with your Makita
machine specified in this manual. The use of any
other accessories or attachments might present a risk
of injury to persons. Only use accessory or attach-
ment for its stated purpose.
CAUTION:
Only use the Makita accessory
or attachment for the machine. Use of any other
accessory or attachment may result in serious per-
sonal injury.
If you need any assistance for more details regard-
ing these accessories, ask your local Makita Service
Center.
• Carrier
• Bucket
• Flat bucket
• Dump unit
• Front tire (black)
• Front tire (gray)
• Rear tire (gray)
• Makita genuine battery and charger
NOTE: Some items in the list may be included in the
tool package as standard accessories. They may
differ from country to country.
MAKITA LIMITED WARRANTY
Please refer to the annexed warranty sheet for the
most current warranty terms applicable to this product.
If annexed warranty sheet is not available, refer to the
warranty details set forth at below website for your
respective country.
United States of America: www.makitatools.com
Canada: www.makita.ca
Other countries: www.makita.com
ENGLISH