IARP EIS112.3 CL Instructions D'emploi Et D'entretien page 8

INSTALLATION
To move the cabinet around on castor wheels,
lift its feet.
Take out packaging and clean all the cabinet
using warm water together with 5% of neutral
soap then dry it with a soft cloth; for the glass
parts only use specific products, avoiding the
use of water which can leave on the glasses
limestone residues.
Keep a distance from the wall of 10 cm. at least.
Cabinet must be installed on a perfectly even
surface (please settle the adjustable feet), far
away from any heat source (radiators, stoves,
etc) including sun rays.
Good running of the cabinet can be compromised
in cases where the airflow is disturbed (wind,
ventilators, air conditioning outlets, etc).
Smooth running of the cabinet is assisted when sufficient
air is permitted to flow through the bottom of the unit; it is
very important that the grills at the base are kept uncovered.
Do not expose the cabinet to rain.
Install and position the unit in such a way so as to allow
easy access to the power socket. Never use electrical
equipment in the refrigerated compartment.
Never place containers of liquid on or immediately above
the ticket counter; should the content spill out, it would damage the counter.
THE REFRIGERATOR IS NOT SUITABLE FOR WORKING IN DANGEROUS
ENVIRONMENT WITH RISK OF FIRE, EXPLOSIONS OR RADIATIONS.
Operation is regular with ambient temperature indicated on technical data plate (in the tank).
Insert between glass door and motor space the
wood part to avoid door frame foldings during
transport.Reinsert it when the cabinet is removed.
10 Cm
WARNING!!
To prevent damaging the mechanism do not
exceed the maximum angle of door opening.
-8-