Park System for storage (dia. 22)
Always disconnect the vacuum
cleaner from the electrical supply
when you have finished using it.
Switch it off at the wall socket and
unplug it.
Stand the vacuum cleaner upright.
Retract the telescopic tube fully so
that the vacuum cleaner takes up less
room for storage.
Slot the floorhead downwards into
the parking attachment on the va-
cuum cleaner.
This makes the vacuum cleaner easier
to carry or store.
For safety reasons, do not lift the
vacuum cleaner by the dust con-
tainer carrying handle.
Maintenance
Always disconnect the vacuum
cleaner from the power supply for
maintenance work and for cleaning.
Switch off at the wall socket and un-
plug it.
Emptying the dust
container (dia. 23 - 28)
Empty the dust container before the
dust has reached the max marking
on the dust container.
Pull the dust container handle up-
wards.
Lift the dust container upwards to re-
move it.
The contents of the container can be
disposed of with normal household
waste, providing they consist of gen-
eral household dust only.
Hold the dust container close to the
bin to prevent dust from billowing out.
Press the yellow release catch on the
bottom of the dust container.
The flap will open and the dust will fall
out.
Close the flap so that it audibly clicks
into place.
Insert the dust container into the va-
cuum cleaner from above so that it
audibly clicks into place.
Push the handle down.
Cleaning the dust container
Clean the dust container as required.
Clean the dust container using water
and mild washing-up liquid.
Dry the dust container thoroughly.
Cleaning the filter frame (dia. 29 + 30)
A removable filter frame is located in the
dust container. This should be cleaned
if it is obviously dirty.
Place the emptied and open dust
container on its front.
Release the filter frame and remove it.
Empty the filter frame and rinse it un-
der cold running water.
Do not use washing-up liquid!
Do not use any sharp or pointed ob-
jects!
Dry the filter frame carefully!
en
43